Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning, it could be because of an inoperative battery for the coin-cell, damaged receiver modules, water problems, or a damaged chip. Luckily, all of these are easy to fix and you'll get your car back to normal in no time at all!
The key blade could become worn out and result in a faulty car key. This can be fixed when you visit your local Car Key Man Auto Locksmith and let them put in the new key blade for you.
Battery
The key fob of your Peugeot 308 may die or become weak enough to not send a powerful signal. The key fob could cease to function and stop you from locking or unlocking your doors, or even starting your engine. You'll need a new battery for your key fob to fix this.
You can purchase a new battery at an auto parts shop, or at your local hardware store. When you purchase the battery ensure that it's new and hasn't been on the shelf for a long time. A brand new battery is more capacity and can transmit a stronger signal your car.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors won't open the issue is likely to be in the receiver module of the car, which can be reprogrammed by your local Peugeot dealer.
It's also possible that the chip inside your key fob is damaged. It is possible to damage your key fob if you drop it on the ground, or expose it to moisture. The rubber seals that protect your chip from moisture can become worn out over time. This is especially the case when you expose your key fob to water for long periods of time, such as submerging it in the ocean. To avoid this you should keep your key fob out of moist areas and away from water.
Water Damage
If your key fob is wet in water, whether you tossed it into the pool or threw it into a puddle, don't think that it's an accident. The key fob is protected by rubber seals, but prolonged exposure to water could harm its electronic chip. Water is a good conductor and any water that is absorbed into the key fob will trigger short circuits in series which can eventually harm the electronic chip. After taking the battery out, clean the contacts with isopropyl alcohol and dry it completely before putting it back into.
Your Peugeot 308 may not start because of a dead battery. Jumper cables are a great method of restarting the engine when you have an additional vehicle. If you suspect that the battery is at fault the battery will need to be replaced.
A defective receiver in your car may also block it from receiving the signal from the key fob. The key fob may be damaged or there may be a problem with the antenna, wiring or the key fob itself. If you have the latest key fob, it could need to be programmed to the vehicle. If you are unable to solve the issue, call an expert technician. A technician who is trained in the field will be able to diagnose the problem quickly, and resolve it quickly.
Radio Interference
The signs of a key fobs that are not recognized or having a limited range typically indicate that there is an interference in the system. The interference could be transmitted or radiated which is caused by power cables and speaker cables being too close to electrical parts. Usually, rerouting the cables or moving them away from the components can solve the problem.
It's unlikely someone is listening to the key fob's signal in order to steal your vehicle or vehicle, but it's possible that radio interference has drowned out the signal. Fortunately, this is not a problem to repair.
If your key fob isn't being recognized by the system, you can try replacing the battery. Make sure the battery is of the correct size and type. Incorrectly sized batteries can damage the fob.
These devices could interfere with the key signal if they are using the same radio frequency. Avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system of cars has an antenna that receives radio frequencies from the key fob. peugeot keys G28CarKeys is not possible to start your car if this receiver is not functioning properly even if the key fob is in good working order and can be reprogrammed. The issue could result from a variety of things, including the battery of a coin that is dead and water damage. The receiver could also be malfunctioning due to a software glitch or internal damage in the key.
The battery inside your Peugeot 308 keyfob may have failed. This battery can be replaced, but you need to be sure it's the proper battery for your keyfob. It is recommended to use an item that has the same size in terms of voltage, size, and specifications as the original.
Another reason your Peugeot 308 key fob might not be working is because it is paired with another vehicle. You may have accidentally given your key fob away to someone else or the key was used to unlock other vehicles. It is possible to fix this issue by reprogramming the fob using an OBDII scanner. This tool will ask for information about your car, like its VIN or engine type. It is essential to enter the correct information.